The PAR-DIM by ELATION is an extreme compact but powerfull dimmer to clip on the brackets of PAR cans. Nearly every on the market available PAR with halogen light source can be so modified to a DMX dimmable spot. The capacy of 6A is suitable for 1000W lamps with reserve.
A security eye can be used as additional security to the screw-clip.
The DMX adrdress can be set by, for protection recessed, did-switches.
To convert a PAR can you can open the lid and run the cables through the stable cable srews. The PAR-DIM can be connected direct to the PAR can or you may add a power socket on the secondary side and use it so very flexible.
The PAR-DIM is used in architectural installations, shop lighting but also great for mobile applications where remote PARs need to be dimmed. To add wireless DMX is a welcome completion. Dimmer adjustable to 25%, 50%, 75% and 100% also without the use of a DMX controller by using the dip switches.
You may choose 3 optional modes for Auto-Dim (fast, medium, slow). The PAR will dim up and down automatically from 0% to 100% in a loop.
An additional great feature is, that the PAR-DIM keeps the DMX value in it?s memory. This enables you to adjust the dim-level and than disconnect the unit from the controller. Also after a power reset the value is still stored and can be changed again by connecting it to the DMX controller.
Specificaties
- 1 DMX channel (USITT 512)
- DMX in/output via XLR 3pin
- dip switches to set DMX address
- power Input: 230V/50Hz
- Dimming power max. 1000W
- dimensions: 114 x 76 x 51mm
- weight: 0,6kg