- Power Rating : 800 W / 1600 W / 3200 W
- Frequency Range : 70 Hz - 20kHz (-10 dB)
- Dimensions(H x W x D) : 349 mm x 546 mm x 260 mm
- Frequency Response : 83 Hz - 18 kHz (3 dB)
- Coverage Pattern : 90 x 50 nominal
- Net Weight : 15 kg (33 lb)
Amplifier manufacturers are building amps that can produce more power at less cost than ever before. The SRX700 series lets you unleash that power with a new generation of high-power low-frequency drivers. That would be enough for most manufacturers, but JBL accomplished this while also greatly reducing the weight of the drivers.
SRX700 uses JBLs patented Differential Drive woofers with neodymium magnets. Neodymium's magnetic properties allow a few ounces to replace pounds of conventional magnet material. While other speaker manufacturers may use neodymium, JBL engineers created a design that reduces the massive (and heavy) steel top plates, back plates, and pole pieces that complete the magnetic circuit. The JBL Differential Drive design uses two voice-coils for greater power handling and actually puts the small neodymium magnets inside the voice-coil. This design greatly reduces weight while increasing power capacity, decreasing distortion, and reducing power compression.
SRX712M 12" two-way stage monitor
The SRX712M was designed with one goal build the lightest, smallest, loudest, clearest stage monitor possible while delivering a strikingly professional appearance. The SRX712M uses a 12" Differential Drive woofer and a 3" (voicecoil diameter) compression driver. The system handles 800 watts (continuous) power yet is only 12" high (305 mm) in the monitor position. A 50 x 90 horn provides smooth, even coverage regardless of the position of the performer. For utility speaker applications, the SRX712M can be tripod mounted or over a subwoofer with JBL's dual angle pole mount providing 0 or 10 down tilt for optimum audience coverage. dbx DriveRack users may select controller settings optimizing the SRX712M for stage monitor or front of house applications (requires bi-amplified operation of the SRX712M). For suspension or truss mounting, the optional SRX712M-YK yoke bracket is available with attachment points for a wide range of suspension and truss mounting hardware.