- Externally biased condenser
- Gold sputtered 1/2" capsule
- Three position PAD - 0dB, -10dB and -20dB
- Three position High-Pass Filter - flat, 75Hz and 150Hz
- Cardioid or Omni polar pattern using interchangeable capsules
- Heavy-duty satin-nickel plated body
- Surface mount circuitry
- Low noise
- Full frequency response
The NT55 utilises the 1/2" gold sputtered true condenser transducer used in the internationally renowned RDE NT5. The NT55 is a low-noise, balanced output microphone, exhibiting a wide dynamic range and full frequency response.
The NT55 circuit incorporates a three position variable PAD with 0dB, -10dB or 20dB attenuation, and a thereposition variable high-pass filter that enables you to step from a flat response to 75 or 150 Hz high pass filter.
The NT55 comes with two different condenser microphone heads to provide a wide variety of polar patterns. The NT55 is complemented with a diverse range of accessories to better facilitate positioning and attachment.
Ook verkrijgbaar als enkele microfoon (RDE NT55)
|Power||P48 (48V) phantom supply|
|Acoustic Principle||Pressure gradient|
|Directional Pattern||Cardioid and Omni|
|Frequency range||20 Hz - 20 kHz (with selectable HPF)|
|Signal noise ratio||79 dB SPL (A - weighted per IEC651)|
|Equivalent noise||15 dB SPL (A - weighted per IEC651)|
|Maximum SPL||136dB SPL (@ 1kHz, 1% THD into 1KO load) (146/156 with PAD)|
|Maximum output voltage||+8dBu (@ 1kHz, 1% THD into 1KO load)|
|Sensitivity||-38 dB re 1 Volt/Pascal (12 mV @ 94 dB SPL) +/- 2 dB @ 1kHz|
|Dimensions||145mmH x 20mmW x 20mmD|